Marsh Runner

Brush Cutter

Brush Cutter Available:

Overall Cutter Width…………………………………………………………………………….……..… 93”
Cutting Width……………………………………………………………………………………..……….… 80”
Cutting Adjustable Height……………………………………………………….…..……..…… 2” to 6”
Max Input Power………………………………………………………………………..…………..…. 50 hp
Max Hydraulic Flow………………………………………………………………………..………. 28 gpm
Cutter Blade Tip Speed………………………………………………………………… 17,000 ft/min.
Cutter Weight………………………………………………………….………………….…..……… 700 lbs
Total Weight (Cutter and Marsh Runner w/ ROPS Cab)………….………..…… 7,500 lbs
Ground Pressure……………………………………………………………..… Approximately 1 p.s.i
Productivity (Depending on the Terrain).….…… Approximately 3.5 to 4 acres/hour
Cutting Capability……………………. Grass, Small Trees, and Brush up to 2.5 Diameter

WATCH CUTTER IN ACTION ON YOUTUBE

Passenger Seating

Holds up to 6 Passengers

Roller Chopper

The perfect implement for flattening and chopping grass, in wet/marshy areas.
Can be used for opening up overgrown waterfowl habitat, creating wet lines for controlled burns in marshes/swamps, or simply laying and chopping grass where our cutter cannot be used.
Drum contains a plug on one end for adding/removing water if additional weight is needed.
This implement operates best where there is approximately 1-3 feet of standing water.

Implement weight:…………..600 lbs
Chopping width:…………….82”
Overall width:……………..92”

ITEM	*SPECIFICATION
LENGTH	16’ – 2”
WIDTH	8’ – 2”
HEIGHT (W/ HEADACHE RACK)	8’ – 8”
GROUND CLEARANCE	33″
TRACK WIDTH	29″
ENGINE	99 HP KUBOTA DIESEL
SPEED ON LAND	APPROXIMATELY 8 MPH
SPEED IN WATER	1 MPH W/ TRACKS
BODY	1/8” & 3/16” ALUMINUM
12,000 LB ELECTRIC WINCH	STD
AUXILIARY TOOL CIRCUIT(LOW FLOW)	8 GPM @ 1600 P.S.I.
AUXILIARY TOOL CIRCUIT (HIGH FLOW)	28 GPM @ 2800 P.S.I.
WEIGHT (APPROX.)	6800 LBS
FLOATING LOAD CAPACITY	1800 LBS
GROUND PRESSURE	APPROX. 1 P.S.I. MINIMUM ENVIRONMENTAL IMPACT
TRANSPORT	CAN BE TOWED WITH A PROPERLY EQUIPPED PICKUP TRUCK
TRANSMISSION	HYDROSTATIC
FINAL DRIVE	DIRECT DRIVE HIGH TORQUE MOTOR